UKOM Optimum AustriAlpin ANSI D-Ring Cobra Buckle Riggers Belt 45mm
100% Manufactured in the UK using the highest quality products available.
This belt follows a military specification design however it is used by a wide range of clients including those working on oil rigs, the outdoors, construction industry, to name but a few.
The UKOM Optimum Riggers Belt is one of the best belts on the market for those needing a heavy duty, lightweight riggers belt.
100% Manufactured in the UK using the highest quality products available.
The buckle is the AustriAlpin D-Ring Cobra, it is a synergistic hybrid of two standard products of safety industry hardware: the parachute D-Ring and the ANSI cobra. The unique construction prevents the D-Ring from getting squeezed against the webbing and therefore guarantees easy handling. ANSI D-Ring cobra meets ANSI and CSA standards. The cobra locking mechanism is patented and guarantees highest safety. a one-sided opening of the lock is not possible even if the buckle is under load. Certified for saltwater, dust, sand and salt fog.
The webbing used for the belt exceeds 6000lbs breaking strain and is stitched using military specification thread.
The webbing is doubled and a special layer is sewn in between giving the belt extra stiffness, this layer allows the belt to be comfortable but also prevents the webbing rolling when drop legs and holsters are attached.
The belt uses military specification hook and loop Velcro.
More about the buckle.
Strength:
Buckle: 18kN / 4000lb MBS (straight pull). 36kN Loop configuration.
Dring: 22kN / 5000 lb MBS (straight pull).
4000lb ANSI Z359.1 compliant Cobra Buckle
ANSI Cobra exceed all ANSI Z359.1 (4.3.1.3 and figure 25) requirements which stipulate that all hardware buckles and adjusters exceed a 17.8kN (4000lb) tensile load /internal frame test for one minute.
